Yaskawa MP940 Reference Manual - Manual (Page 204)

Parameter Setting MotionSuite™ MP940 Machine Controller Reference Manual
6-4
Parameter Setting
Fixed Parameter Setting
Set the parameters needed for servo adjustment in the Fixed Parameters
tab.
See “Details of Fixed Parameters” for the setting content of the individual
parameters.
The default values may be set without inputting each fixed parameter.
Display the default values of the various fixed parameters in the fixed
parameter setting table.
Fixed Parameters Tab
Item Name Content
Axis Number The axis number shown in the combo box.Setting for “Axis1”
No. Fixed Parameter Number
Name Name of parameter to be set.
Input Data Input (select) the parameter value.See the “Fixed Motion
Parameters” list.
Unit Setting data unit