PLANET XGS3-24042 - Manual (Page 219)

12-65
mode.
Switch(config)#interface ethernet 1/0/5
Switch(Config-If-Ethernet1/0/5)#switchport mode hybrid
Switch(Config-If-Ethernet1/0/5)#switchport hybrid allowed vlan 1;3;5-20 untag
Switch(Config-If-Ethernet1/0/5)#switchport hybrid allowed vlan 100; 300; 500-2000 tag
Switch(Config-If-Ethernet1/0/5)#exit
12.1.28 switchport hybrid native vlan
Command:
switchport hybrid native vlan <vlan-id>
no switchport hybrid native vlan
Function:
Set the PVID for Hybrid port; the “no switchport hybrid native vlan” command restores the default
setting.
Parameter:
<vlan-id> is the PVID of Hybrid port.
Command mode:
Port Mode.
Default:
The default PVID of Hybrid port is 1.
Usage Guide:
When an untagged frame enters a Hybrid port, it will be added a tag of the native PVID which is set
by this command, and is forwarded to the native VLAN.
Example:
Set the native vlan to 100 for a Hybrid port.
Switch(config)#interface ethernet 1/0/5
Switch(Config-If-Ethernet1/0/5)#switchport mode hybrid
Switch(Config-If-Ethernet1/0/5)#switchport hybrid native vlan 100
Switch(Config-If-Ethernet1/0/5)#exit
12.1.29 switchport interface
Command:
switchport interface [ethernet | portchannel] [interface-name | interface-list]
no switchport interface [ethernet | portchannel] [interface-name | interface-list]