PLANET XGS3-24042 - Manual (Page 925)

45-70
Enable MLD Snooping on specified VLAN; the “no” form of this command disables MLD Snooping
on specified VLAN.
Parameter:
<vlan-id> is the id number of the VLAN, with a valid range of <1-4094>.
Command Mode:
Global Mode
Default:
MLD Snooping disabled on VLAN by default
Usage Guide:
To configure MLD snooping on certain VLAN, the global MLD snooping should be first enabled.
Disable MLD snooping on specified VLAN with the no ipv6 mld snooping vlan vid command
Example:
Enable MLD snooping on VLAN 100 under global mode.
Switch (config)#ipv6 mld snooping vlan 100
45.8.6 ipv6 mld snooping vlan immediate-leave
Command:
ipv6 mld snooping vlan <vlan-id> immediate-leave
no ipv6 mld snooping vlan <vlan-id> immediate-leave
Function:
Enable immediate-leave function of the MLD protocol in specified VLAN; the “no” form of this
command disables the immediate-leave function of the MLD protocol
Parameter:
<vlan-id> is the id number of specified VLAN, with valid range of <1-4094>.
Command Mode:
Global Mode
Default:
Disabled by default
Usage Guide:
Enabling the immediate-leave function of the MLD protocol will hasten the process the port leaves
one multicast group, in which the specified group query of the group will not be sent and the port will
be directly deleted.
Example:
Enable the MLD immediate-leave function on VLAN 100.
Switch (config)#ipv6 mld snooping vlan 100 immediate-leave