PLANET XGS3-24042 - Manual (Page 977)

48-13
authentication.
Example:
Enabling real-time re-authentication on port1/0/8.
Switch(config)#dot1x re-authenticate interface ethernet 1/0/8
48.19 dot1x re-authentication
Command:
dot1x re-authentication
no dot1x re-authentication
Function:
Enables periodical supplicant authentication; the “no dot1x re-authentication” command disables
this function.
Command mode:
Global Mode.
Default:
Periodical re-authentication is disabled by default.
Usage Guide:
When periodical re-authentication for supplicant is enabled, the switch will re-authenticate the
supplicant at regular interval. This function is not recommended for common use.
Example:
Enabling the periodical re-authentication for authenticated users.
Switch(config)#dot1x re-authentication
48.20 dot1x timeout quiet-period
Command:
dot1x timeout quiet-period <seconds>
no dot1x timeout quiet-period
Function:
Sets time to keep silent on supplicant authentication failure; the “no dot1x timeout quiet-period”
command restores the default value.
Parameters:
<seconds> is the silent time for the port in seconds, the valid range is 1 to 65535.
Command mode: