PLANET XGS3-24042 - Manual (Page 212)

12-58
Show running state and expiration time of each leave timer on current port.
Switch#show gvrp leavetimer running information interface ethernet 1/0/1
VLANID running state expired time
------------ ---------- ---------
100 UP 0.2 s
300 DOWN non
12.1.19 show gvrp port-member
Command:
show gvrp (active|) port-member
Function:
Shows all ports with GVRP enabled. “active” means the port is in active state with GVRP enabled.
Parameter:
active means the port is in active state
Command mode:
Admin Mode.
Default:
GVRP is disabled on port.
Usage Guide:
Show all ports (enable GVRP) saved in GVRP.
Example:
Show all ports with GVRP enabled.
Switch#show gvrp port member
Ports which were enabled gvrp included：
Ethernet1/0/3（T） Ethernet1/0/4（T）
Ethernet1/0/5（T） Ethernet1/0/6（T）
Ethernet1/0/7（T） Ethernet1/0/8（T）
Ethernet1/0/9（T） Ethernet1/0/10（T）
12.1.20 show gvrp port registerd vlan
Command:
show gvrp port (dynamic | static |) registerd vlan interface (Ethernet | port-channel |) IFNAME
Function:
Show the dynamic or static registration VLANs on current port.