PLANET XGS3-24042 - Manual (Page 1065)

59-4
switch#debug webportal packet ?
all Send and receive packet information
receive Receive package information
send Send package information
switch#debug webportal packet all interface ethernet 1/0/1
Ethernet1/0/1 0 packet rx debug is on
Ethernet1/0/1 0 packet tx debug is on
59.6 ip dhcp snooping binding webportal
Command:
ip dhcp snooping binding webportal
no ip dhcp snooping binding webportal
Function:
Enable/disable dhcp snooping binding web portal function.
Command Mode:
Port Mode.
Default:
Disable the function.
Usage Guide:
Enable dhcp snooping binding web portal function, the no command disables the function.
Example:
Enable dhcp snooping binding web portal function.
switch(config)#ip dhcp snooping binding enable
switch(config)#interface ethernet 1/0/1
switch(config-if-ethernet1/0/1)#ip dhcp snooping binding webportal
59.7 show webportal
Command:
show webportal {interface <ethernet IFNAME | IFNAME> |}
Function:
Show the parameter and enable information of web portal authentication.
Parameter:
<ethernet IFNAME | IFNAME>: The port name, if the port name is null, show all port information.