PLANET XGS3-24042 - Manual (Page 618)

36-257
Switch#show ipv6 ospf redistribute
ospf process abc redistribute information：
ospf process def
bgp
ospf process def redistribute information：
ospf process abc
Switch#show ipv6 ospf abc redistribute
ospf process abc redistribute information：
ospf process def
bgp
36.36 show ipv6 ospf topology
Command:
show ipv6 ospf [<tag>] topology [area <area-id>]
Function:
Show messages of OSPF topology.
Parameter:
<tag> is the processes tag, which is a character string.
<area-id> is an area ID which could be shown in digits ranging between 0～4294967295, or an
IPv4 address.
Default:
Not displayed.
Command Mode:
All modes
Example:
Switch#show ipv6 ospf topology
OSPFv3 Process (*null*)
OSPFv3 paths to Area (0.0.0.0) routers
Router ID Bits Metric Next-Hop Interface
192.168.2.1 10 192.168.2.1 Vlan2
192.168.2.2 --
192.168.2.3 10 192.168.2.3 Vlan1