PLANET XGS3-24042 - Manual (Page 86)

XGS3 Command Guide
1-86
bad values errors Number of “Bad_values” error SNMP packets.
general errors Number of “General_errors” error SNMP packets.
response PDUs Number of response packets sent.
trap PDUs Number of Trap packets sent.
1.4.6 show snmp engineid
Command:
show snmp engineid
Function:
Display the engine ID commands.
Command Mode:
Admin and Configuration Mode.
Example:
Switch#show snmp engineid
SNMP engineID:3138633303f1276c Engine Boots is:1
Displayed Information Explanation
SNMP engineID Engine number
Engine Boots Engine boot counts
1.4.7 show snmp group
Command:
show snmp group
Function:
Display the group information commands.
Command Mode:
Admin and Configuration Mode.
Example:
Switch#show snmp group
Group Name:initial Security Level:noAuthnoPriv
Read View:one
Write View:<no writeview specified>
Notify View:one
Displayed Information Explanation