33 show ipv6 ospf neighbor, Show ipv, Ospf neighbor – PLANET XGS3-24042 User Manual

Page 616

Advertising
background image


36-255

Hello due in 00:00:10

retransmission.

Neighbor Count is 1, Adjacent neighbor count is 1

Numbers of the adjacent layer 3 switch; number of

the layer 3 switches established with neighbor

relation

36.33 show ipv6 ospf neighbor

Command:

show ipv6 ospf [<tag>] neighbor [<neighbor_id> | <ifname> detail | detail ]

Function:

Show OSPF adjacent point messages.

Parameter:

<tag> is process tag, which is a character string

<neighbor_id> is the neighbor ID shown in IPv4 address format

detail: Show neighbor details

<ifname> name of the interface

Default:

Not displayed

Command Mode:

All modes

Usage Guide:

OSPF neighbor state can be checked by viewing the output of this command.

Example:

Switch#show ipv6 ospf neighbor

OSPFv3 Process (*null*)

Neighbor ID Pri State Dead Time Interface Instance ID

192.168.2.3 1 Full/Backup 00:00:29 Vlan1 0

192.168.2.1 1 Full/DR 00:00:38 Vlan2 0 Vlan1

Displayed information

Explanation

Neighbor ID

Neighbor ID

Instance ID

Instance ID

Address

IP address of neighboring layer 3 switch

Interface

Interface the neighbor belongs

State

Neighbor relationship state

Pri

Priority

Advertising
This manual is related to the following products: