PLANET XGS3-24042 - Manual (Page 639)

37-278
Example:
Clear the BGP dampening statistic messages of IPv4 unicast cluster.
Switch#clear ip bgp ipv4 unicast flap-statistics
37.30 debug bgp
Command:
debug bgp [<MODULE>|all]
no debug bgp [<MODULE>|all]
Function:
For BGP debugging. The “no debug bgp [<MODULE>|all]” command closes the BGP debugging
messages
Parameter:
<MODULE>: BGP module names, including dampening、events、filters、fsm、keepalives、nsm、
updates, etc.
Command Mode:
Admin mode
Usage Guide:
For monitoring BGP events and the encountered errors, warning messages.
Example:
Display the debugging messages of all bgp modules.
Switch#debug bgp all
37.31 debug bgp redistribute message send
Command:
debug bgp redistribute message send
no debug bgp redistribute message send
Function:
To enable debugging switch of sending messages for redistribution of routing information from
external process such as OSPF and RIP to BGP. The no command will disable the debugging
switch.
Default:
Close the debug by default.
Command Mode: