PLANET XGS3-24042 - Manual (Page 1060)

58-13
Enable ND packets debug.
Switch#debug ipv6 nd snooping packet
58.2.1.7 show savi ipv6 check source binding
Command:
show savi ipv6 check source binding [interface<if-name>]
Function:
Show the global SAVI binding entry list.
Parameter:
if-name: port name such as interface ethernet 1/0/1.
Command Mode:
Admin Mode.
Usage Guide:
Descriptions of each field are as below:
Field Description
MAC The bound MAC address
IP The bound IP address
Vlan The binding VLAN belongs to
Port The binding port belongs to
Type Binding type
State Binding state
Expires The bound lifetime period
Example:
Show the global binding state of SAVI.
Switch(config)#show savi ipv6 check source binding
Static binding count: 0
Dynamic binding count: 3
Binding count: 3
MAC IP VLAN Port Type State Expires
--------------------------------------------------------------------------------------------------------------
00-25-64-bb-8f-04 fe80::225:64ff:febb:8f04 1 Ethernet1/0/5 slaac BOUND 14370
00-25-64-bb-8f-04 2001::13 1 Ethernet1/0/5 slaac BOUND 14370
00-25-64-bb-8f-04 2001::10 1 Ethernet1/0/5 slaac BOUND 14370