25 ethernet-oam timeout, 26 show ethernet-oam, Ethernet – PLANET XGS3-24042 User Manual

Page 191: Oam timeout, Show ethernet

Advertising
background image

11-37

11.25 ethernet-oam timeout

Command:

ethernet-oam timeout <seconds>

no ethernet-oam timeout

Function:

Configure the timeout of OAM connection, no command restores the default value.

Parameter:

<seconds>, the timeout ranging from 5 to 10 seconds.

Default:

5s.

Command Mode:

Port mode

Usage Guide:

OAM connection will be disconnected if no OAMPDU is received after specified timeout.

Example:

Set the timeout of OAM connection for ethernet 1/0/4 to 6 seconds.

Switch(Config-If-Ethernet1/0/4)#ethernet-oam timeout 6

11.26 show ethernet-oam

Command:

show ethernet-oam [{local | remote} interface {ethernet |} <IFNAME>]

Function:

Show Ethernet OAM connection of specified or all ports.

Parameter:

Overview information of all Ethernet OAM connections will be shown if no parameters is input

local, show detailed information of local OAM connection

remote, show detailed information of remote OAM connection

<IFNAME>, the port that OAM connection information will be shown

Command Mode:

Admin mode

Example:

Show overview information of Ethernet OAM connection.

Switch#show ethernet-oam

Remote-Capability codes: L - Link Monitor, R - Remote Loopback

Advertising
This manual is related to the following products: