PLANET XGS3-24042 - Manual (Page 986)

49-4
49.6 debug vlan mac count
Command:
debug vlan mac count
no debug vlan mac count
Function:
When the number limitation function debug of MAC in the VLAN, if the number of dynamic MAC and
the number of MAC in the VLAN is larger than the max number allowed, users will see debug
information. ”no debug vlan mac count” command is used to disable the number limitation
function debug of MAC in the VLAN.
Command Mode:
Admin Mode.
Usage Guide:
Display the debug information of the number of dynamic MAC in the VLAN.
Examples:
Switch#debug vlan mac count
%Jun 14 16:04:40 2007 Current mac count 21 is more than or equal to the maximum limit in
vlan 1!!
%Jun 14 16:04:40 2007 Mac learning will be stopped and some mac will be delete !!
49.7 ip arp dynamic maximum
Command:
ip arp dynamic maximum <value>
no ip arp dynamic maximum
Function:
Set the max number of dynamic ARP allowed in the VLAN, and, at the same time, enable the
number limitation function of dynamic ARP in the VLAN; “no ip arp dynamic maximum” command
is used to disable the number limitation function of dynamic ARP in the VLAN.
Parameters:
<value> upper limit of the number of dynamic ARP in the VLAN, ranging from 1 to 4096.
Default Settings:
The number limitation function of dynamic ARP in the VLAN is disabled.
Command Mode:
Interface Configuration Mode.
Usage Guide: