PLANET XGS3-24042 - Manual (Page 642)

37-281
Usage Guide:
Set the manage distance for specified BGP route as the path selecting basis.
Example:
Set the manage distance for route 90 10.1.1.64/32 to be 90.
Switch(config-router)# distance 90 10.1.1.64/32
37.36 distance bgp
Command:
distance bgp <1-255> <1-255> <1-255>
no distance bgp [<1-255> <1-255> <1-255>]
Function:
Set the BGP protocol management distance. The “no distance bgp [<1-255> <1-255> <1-255>]”
command restores the manage distance to default value.
Parameter:
<1-255> Respectively the EBGP, IBGP and LOCAL manage distance of the BGP.
Default:
Default EBGP is 20, others are 200.
Command Mode:
BGP route mode
Usage Guide:
Set the manage distance for BGP routing as the NSM path selecting basis.
Example:
Set the manage distance for BGP routing as 15, the manage distance for IBGP and local routing as
150.
Switch(config-router)# distance bgp 15 150 150
37.37 exit-address-family
Command:
exit-address-family
Function:
Exit the BGP address-family mode.
Command Mode:
BGP address-family mode