PLANET XGS3-24042 - Manual (Page 540)

34-179
route-map<word> is the pointer to the introduced routing map.
Default:
Not redistributed by default.
Command Mode:
RIPng Configuration Mode.
Example:
To redistribute OSPFv3 ABC routing ro RIPng.
Switch(config)#router ipv6 rip
Switch (config-router)#redistribute ospf abc
34.17 route
Command:
route <ipv6-address>
no route <ipv6-address>
Function:
This command configures a static RIPng route. The “no route <ipv6-address>“ command deletes
this route.
Parameter:
Specifies this destination IPv6 address prefix and its length show in colon hex notation.
Usage Guide:
The command adds a static RIPng route, and is mainly used for debugging. Routes configured by
this command will not appear in kernel route table but in the RIPng route database, however it could
be located by using the show ipv6 rip command.
Command Mode:
Router mode
Example:
Switch#config terminal
Switch(config)#router ipv6 rip
Switch(config-router)#route 3ffe:1234:5678::1/64
34.18 router ipv6 rip
Command:
router ipv6 rip