PLANET XGS3-24042 - Manual (Page 598)

36-237
no default-metric
Function:
The command set the default metric value of OSPF routing protocol; the “no default-metric”
returns to the default state.
Parameter:
<value>, metric value, ranging between 1~16777214.
Default:
Built-in, metric value auto translating.
Command Mode:
OSPF protocol mode
Usage Guide:
When the default metric value makes the metric value not compatible, the route introducing still
goes through. If the metric value can not be translated, the default value provides alternative option
to carry the route introducing on. This command will result in that all introduced route will use the
same metric value. This command should be used associating redistribute.
Example:
Switch#config terminal
Switch(config)#router ipv6 ospf
Switch(config-router)#default-metric 100
36.7 debug ipv6 ospf events
Command:
[no] debug ipv6 ospf events [abr|asbr|os|router|vlink]
Function:
Open debugging switches showing OSPF events. The “no debug ipv6 ospf events
[abr|asbr|os|router|vlink]” command closes this debugging switch.
Default:
Closed.
Command Mode:
Admin mode
Example:
Switch#debug ipv6 ospf events
1970/01/01 01:10:35 IMI: ROUTER[Process:(null)]: GC timer expire