PLANET XGS3-24042 - Manual (Page 959)

47-25
{{<source><source-wildcard>}|any-source|{host-source<source-host-ip>}}
{{<destination><destination-wildcard>}|any-destination|{host-destination
<destination-host-ip>}} [precedence <precedence>] [tos
<tos>][time-range<time-range-name>]
Functions:
Define an extended name MAC-IP ACL rule, no form deletes one extended numeric MAC-IP ACL
access-list rule.
Parameters:
num access-list serial No. this is a decimal’s No. from 3100-3199; deny if rules are matching, deny
to access; permit if rules are matching, permit to access; any-source-mac: any source MAC
address; any-destination-mac: any destination MAC address; host_smac, smac: source MAC
address; smac-mask: mask (reverse mask) of source MAC address ; host_dmac , dmas
destination MAC address; dmac-mask mask (reverse mask) of destination MAC address; protocol
No. of name or IP protocol. It can be a key word: eigrp, gre, icmp, igmp, igrp, ip, ipinip, ospf, tcp, or
udp, or an integer from 0-255 of list No. of IP address. Use key word ‘ip’ to match all Internet
protocols (including ICMP, TCP, AND UDP) list; source-host-ip, source No. of source network or
source host of packet delivery. Numbers of 32-bit binary system with dotted decimal notation
expression; host: means the address is the IP address of source host, otherwise the IP address of
network; source-wildcard: reverse of source IP. Numbers of 32-bit binary system expressed by
decimal’s numbers with four-point separated, reverse mask; destination-host-ip, destination No. of
destination network or host to which packets are delivered. Numbers of 32-bit binary system with
dotted decimal notation expression; host: means the address is that the destination host address,
otherwise the network IP address; destination-wildcard: mask of destination. I Numbers of 32-bit
binary system expressed by decimal’s numbers with four-point separated, reverse mask;
s-port(optional): means the need to match TCP/UDP source port; port1(optional): value of
TCP/UDP source interface No., Interface No. is an integer from 0-65535; <sPortMin>, the down
boundary of source port; <sPortMax>, the up boundary of source port; d-port(optional): means
need to match TCP/UDP destination interface; port3(optional): value of TCP/UDP destination
interface No., Interface No. is an integer from 0-65535; <dPortMin>, the down boundary of
destination port; <dPortMax>, the up boundary of destination port; [ack] [fin] [psh] [rst] [urg]
[syn], (optional) only for TCP protocol, multi-choices of tag positions are available, and when TCP
data reports the configuration of corresponding position, then initialization of TCP data report is
enabled to form a match when in connection; precedence (optional) packets can be filtered by
priority which is a number from 0-7; tos (optional) packets can be filtered by service type which ia
number from 0-15; icmp-type (optional) ICMP packets can be filtered by packet type which is a
number from 0-255; icmp-code (optional) ICMP packets can be filtered by packet code which is a
number from 0-255; igmp-type (optional) ICMP packets can be filtered by IGMP packet name or
packet type which is a number from 0-255; <time-range-name>, name of time range.