PLANET XGS3-24042 - Manual (Page 409)

27-48
27.13 ipv6 dhcp client pd hint
Command:
ipv6 dhcp client pd hint <prefix|prefix-length>
no ipv6 dhcp client pd hint <prefix|prefix-length>
Function:
Designate the prefix demanded by the client and its length. The no operation of this command will
delete that prefix and its length from the specified interface.
Parameters:
<prefix|prefix-length> means the prefix demanded by the client and its length.
Command Mode:
Interface Configure Mode.
Default Settings:
There is no such configuration in the system by default.
Usage Guide:
The system designates a prefix and its length on the interface for a client. If client prefix-proxy
demanding function is enabled on the interface and hint function is enabled on the switch, the user
will have prior claim to the prefix it demands and the prefix length when the server allocates them.
Only one hint prefix is allowed in the system.
Examples:
Switch(vlan-1-config)#ipv6 dhcp client pd hint 2001::/48
27.14 ipv6 dhcp pool
Command:
ipv6 dhcp pool <poolname>
no ipv6 dhcp pool <poolname>
Function:
To configure the address pool for DHCPv6, and enter the DHCPv6 address pool configuration mode.
In this mode, information such as the address prefix to be allocated, the DNS server addresses, and
domain names, can be configured for the DHCPv6 client. The no form of this command will remove
the configuration of the address pool.
Parameter:
< poolname> is the address pool name of DHCPv6 with its length no more than 32.