PLANET XGS3-24042 - Manual (Page 1090)

62-5
Enable MRPP protocol module, the “no mrpp enable” command disables MRPP protocol.
Command Mode:
Global Mode.
Default:
The system doesn’t enable MRPP protocol module.
Usage Guide:
If it needs to configure MRPP ring, it enables MRPP protocol. Executing “no mrpp enable”
command, it ensures to disable the switch enabled MRPP ring.
Example:
Globally enable MRPP.
Switch(config)#mrpp enable
62.8 mrpp poll-time
Command:
mrpp poll-time <20-2000>
Function:
Configure the query interval of MRPP.
Command mode:
Global mode.
Usage Guide:
Configure the query time to adjust the query interval of MRPP, the default interval is 100ms.
Example:
Set the query time as 200ms.
Switch(Config)# mrpp poll-time 200
62.9 mrpp ring
Command:
mrpp ring <ring-id>
no mrpp ring <ring-id>
Function:
Create MRPP ring, and access MRPP ring mode, the “no mrpp ring<ring-id>” command deletes
configured MRPP ring.
Parameter: