PLANET XGS3-24042 - Manual (Page 78)

XGS3 Command Guide
1-78
Switch(config)#ssh-server max-connection 10
1.2.16 ssh-server timeout
Command:
ssh-server timeout <timeout>
no ssh-server timeout
Function:
Configure timeout value for SSH authentication; the “no ssh-server timeout” command restores the default timeout
value for SSH authentication.
Parameter:
<timeout> is timeout value; valid range is 10 to 600 seconds.
Command mode:
Global Mode
Default:
SSH authentication timeout is 180 seconds by default.
Example:
Set SSH authentication timeout to 240 seconds.
Switch(config)#ssh-server timeout 240
1.2.17 show ssh-server
Command:
show ssh-server
Function:
Display SSH state and users which log on currently.
Command mode:
Admin Mode.
Example:
Switch#show ssh-server
ssh server is enabled
ssh-server timeout 180s
ssh-server authentication-retries 3
ssh-server max-connection number 6
ssh-server login user number 2