PLANET XGS3-24042 - Manual (Page 589)

35-228
Parameter: .
<process-id> is the process ID ranging between 0~65535
Default:
Not displayed
Command Mode:
Admin and configuration mode
Example:
Switch#show ip ospf route
O 10.1.1.0/24 [10] is directly connected, Vlan1, Area 0.0.0.0
O 10.1.1.4/32 [10] via 10.1.1.4, Vlan1, Area 0.0.0.0
IA 11.1.1.0/24 [20] via 10.1.1.1, Vlan1, Area 0.0.0.0
IA 11.1.1.2/32 [20] via 10.1.1.1, Vlan1, Area 0.0.0.0
IA 12.1.1.0/24 [20] via 10.1.1.2, Vlan1, Area 0.0.0.0
IA 12.1.1.2/32 [20] via 10.1.1.2, Vlan1, Area 0.0.0.0
O 13.1.1.0/24 [10] is directly connected, Vlan4, Area 0.0.0.3
O 14.1.1.0/24 [10] is directly connected, Vlan5, Area 0.0.0.4
IA 15.1.1.0/24 [20] via 13.1.1.2, Vlan4, Area 0.0.0.3
IA 15.1.1.2/32 [20] via 13.1.1.2, Vlan4, Area 0.0.0.3
E1 100.1.0.0/16 [21] via 10.1.1.1, Vlan1
E1 100.2.0.0/16 [21] via 10.1.1.1, Vlan1
35.61 show ip ospf virtual-links
Command:
show ip ospf [<process-id>] virtual-links
Function:
Display the OSPF virtual link message.
Parameter:
<process-id> is the process ID ranging between 0~65535.
Default:
Not displayed
Command Mode:
Admin and configuration mode
Example:
Switch#show ip ospf virtual-links