PLANET XGS3-24042 - Manual (Page 55)

XGS3 Command Guide
1-55
Example:
Switch>enable
Switch#
1.1.10 enable password
Command:
enable password [0|7] <password>
no enable password
Function:
Configure the password used for enter Admin Mode from the User Mode,
The “no enable password” command deletes this password.
Parameter:
password is the password for the user. If input option 0 on password setting, the password is not encrypted; if input
option 7, the password is encrypted.
Command mode:
Global Mode
Default:
This password is empty by system default
Usage Guide:
Configure this password to prevent unauthorized entering Admin Mode. It is recommended to set the password at
the initial switch configuration. Also, it is recommended to exit Admin Mode with “exit” command when the
administrator needs to leave the terminal for a long time.
1.1.11 end
Command:
end
Function:
Quit current mode and return to Admin mode when not at User Mode/ Admin Mode.
Command mode:
Except User Mode/ Admin Mode
Example:
Quit VLAN mode and return to Admin mode.
Switch(config-vlan1)#end
Switch#