PLANET XGS3-24042 - Manual (Page 71)

XGS3 Command Guide
1-71
method can be used.
The authentication line console login command is exclusive with the “login” command. The authentication line
console login command configures the switch to use the Console login method. And the login command makes the
Console login to use the passwords configured by the password command for authentication.
If local authentication is configured while no local users are configured, users will be able to login the switch via the
Console method.
Example:
Configure the remote login authentication mode to radius.
Switch(config)#authentication login radius
Relative Command:
aaa enable, radius-server authentication host
1.2.4 authentication securityip
Command:
authentication securityip <ip
no authentication securityip <ip-addr>
Function:
To configure the trusted IP address for Telnet and HTTP login method. The no form of this command will remove the
trusted IP address configuration.
Parameters:
<ip-addr> is the trusted IP address of the client in dotted decimal format which can login the switch.
Default:
No trusted IP address is configured by default.
Command Mode:
Global Mode.
Usage Guide:
IP address of the client which can login the switch is not restricted before the trusted IP address is not configured.
After the trusted IP address is configured, only clients with trusted IP addresses are able to login the switch. Up to 32
trusted IP addresses can be configured in the switch.
Example:
To configure 192.168.1.21 as the trusted IP address.
Switch(config)# authentication securityip 192.168.1.21
1.2.5 authentication securityipv6
Command: