PLANET XGS3-24042 - Manual (Page 355)

19-201
Switch(config)# no ip fib optimize
19.4 Commands for URPF
19.4.1 show urpf
Command:
show urpf
Function:
Display which interfaces have been enabled with URPF function.
Command Mode:
Admin and Configuration Mode
Example:
Switch#show urpf
19.4.2 urpf enable
Command:
urpf enable
no urpf enable
Function:
Enable the global URPF function.
Command mode:
Global Mode
Default:
The URPF protocol module is disabled by default.
Example:
Switch(config)#urpf enable
19.5 Commands for ARP Configuration
19.5.1 arp