PLANET XGS3-24042 - Manual (Page 383)

26-22
ip dhcp conflict logging, show ip dhcp conflict
26.1.4 clear ip dhcp server statistics
Command:
clear ip dhcp server statistics
Function:
Deletes the statistics for DHCP server, clears the DHCP server count.
Command mode:
Admin Mode.
Usage Guide:
DHCP count statistics can be viewed with “show ip dhcp server statistics” command, all
information is accumulated. You can use the “clear ip dhcp server statistics” command to clear
the count for easier statistics checking.
Example:
Clearing the count for DHCP server.
Switch#clear ip dhcp server statistics
Related Command:
show ip dhcp server statistics
26.1.5 client-identifier
Command:
client-identifier <unique-identifier>
no client-identifier
Function:
Specifies the unique ID of the user when binding an address manually; the “no client-identifier”
command deletes the identifier.
Parameters:
<unique-identifier> is the user identifier, in dotted Hex format.
Command Mode:
DHCP Address Pool Mode
Usage Guide:
This command is used with “host” when binding an address manually. If the requesting client
identifier matches the specified identifier, DHCP server assigns the IP address defined in “host”
command to the client.
Example: