PLANET XGS3-24042 - Manual (Page 956)

47-22
47.21 permit | deny(ipv6 standard)
Command:
[no] {deny | permit} {{<sIPv6Prefix/sPrefixlen>} | any-source | {host-source <sIPv6Addr>}}
Function:
Create a standard nomenclature IPv6 access control rule; the no form of this command deletes the
nomenclature standard IPv6 access control rule.
Parameter:
<sIPv6Prefix> is the prefix of the source IPv6 address, <sPrefixlen> is the length of the IPv6
address prefix, the valid range is 1~128. <sIPv6Addr> is the source IPv6 address.
Command Mode:
Standard IPv6 nomenclature access list mode
Default:
No access list configured by default.
Example:
Permit packets with source address of 2001:1:2:3::1/64 while denying those with source address of
2001:1:2:3::1/48.
Switch(config)#ipv6 access-list standard ipv6Flow
Switch(Config-IPv6-Std-Nacl-ipv6Flow)# permit 2001:1:2:3::1/64
Switch(Config-IPv6-Std-Nacl-ipv6Flow)# deny 2001:1:2:3::1/48
47.22 permit | deny(mac extended)
Command:
[no]{deny|permit} {any-source-mac|{host-source-mac <host_smac> }|{ <smac>
<smac-mask> }} {any-destination-mac|{host-destination-mac <host_dmac> }|{ <dmac>
<dmac-mask> }} [cos <cos-val> [ <cos-bitmask> ][vlanid <vid-value> [ <vid-mask> ][ethertype
<protocol> [ <protocol-mask> ]]]]
[no]{deny|permit} {any-source-mac|{host-source-mac <host_smac> }|{ <smac>
<smac-mask> }} {any-destination-mac|{host-destination-mac <host_dmac> }|{ <dmac>
<dmac-mask> }} [ethertype <protocol> [ <protocol-mask> ]]
[no]{deny|permit} {any-source-mac|{host-source-mac <host_smac> }|{ <smac>
<smac-mask> }} {any-destination-mac|{host-destination-mac <host_dmac> }|{ <dmac>
<dmac-mask> }} [vlanid <vid-value> [ <vid-mask> ][ethertype <protocol> [ <protocol-mask> ]]]
[no]{deny|permit} {any-source-mac|{host-source-mac <host_smac> }|{ <smac>
<smac-mask> }} {any-destination-mac|{host-destination-mac <host_dmac> }|{ <dmac>