PLANET XGS3-24042 - Manual (Page 1068)

59-7
no webportal enable
Function:
Enable/disable the global web portal authentication.
Command Mode:
Global Mode.
Default:
Do not enable the global web portal authentication.
Usage Guide:
Enable the global web portal authentication. The no command disables the web portal
authentication globally.
Example:
Enable/disable web portal authentication.
Switch(config)# webportal enable
show running-config shows the global webportal authentication which is enabled successfully.
59.11 webportal enable (Port)
Command:
webportal enable
no webportal enable
Function:
Enable/disable web portal authentication of the port.
Command Mode:
Port Mode.
Default:
Do not enable web portal authentication of the port.
Usage Guide:
Enable web portal authentication of the port. The no command disables web portal authentication of
the port, it is mutually exclusive with 802.1x on port.
Example:
Enable/disable web portal authentication on port.
switch(config)#interface ethernet 1/0/1
switch(config-if-ethernet1/0/1)#webportal enable
show running-config shows webportal authentication of the port enabled successfully