PLANET XGS3-24042 - Manual (Page 705)

39-9
Usage Guide:
Configure the GREv4 tunnel mode, the data packets are encapsulated with GREv4 to be forwarded.
Example:
Configure the data packets to process the encapsulation of the GREv4 to be forwarded.
Switch(config)# interface tunnel 1
Switch(config-if-tunnel1)# tunnel mode gre ip
39.13 tunnel mode gre ipv6
Command:
tunnel mode gre ipv6
no tunnel mode
Function:
Configure the tunnel mode as GREv6 tunnel, after the GRE data packets are encapsulated, it has
an IPv6 packet head, and pass the IPv6 network.
Command mode:
Tunnel interface configuration mode.
Usage Guide:
Configure the GREv6 tunnel mode, the data packets are encapsulated with GREv6 to be forwarded.
Example:
Configure the data packets to process the encapsulation of the GREv6 to be forwarded.
Switch(config)# interface tunnel 2
Switch(config-if-tunnel1)# tunnel mode gre ipv6
39.14 tunnel source
Command:
tunnel source {<ipv6-address> | <ipv4-address>}
no tunnel source
Function:
Configure the source address (IPv6 or IPv4 address) for GRE tunnel.
Parameter:
<ipv6-address > is the IPv6 address, <ipv4-address> is the IPv4 address.
Command mode:
Tunnel interface configuration mode.