PLANET XGS3-24042 - Manual (Page 641)

37-280
Example:
Switch# debug ipv6 bgp redistribute message send
37.34 debug ipv6 bgp redistribute route receive
Command:
debug ipv6 bgp redistribute route receive
no debug ipv6 bgp redistribute route receive
Function:
To enable debugging switch of received messages from NSM for MBGP4+. The no form of this
command will disable debugging switch of received messages from NSM for MBGP4+.
Default:
Close the debug by default.
Command Mode:
Admin Mode.
Example:
Switch# debug ipv6 bgp redistribute route receive
Switch# no debug ipv6 bgp redistribute route receive
37.35 distance
Command:
distance <1-255> <ip-address/M> [<WORD>]
no distance <1-255> <ip-address/M> [<WORD>]
Function:
Set the manage distance of the routing prefix. The “no distance <1-255> <ip-address/M>
[<WORD>]” command restores to the default value.
Parameter:
<1-255>: Manage distance.
<ip-address/M>: Routing prefix.
<WORD>: Access-list name.
Default:
Not set.
Command Mode:
BGP route mode