PLANET XGS3-24042 - Manual (Page 322)

19-168
Example:
Switch(config)#ip vrf VRF-A
Switch(config-vrf)#
19.1.7 ip vrf forwarding vrfName
Command:
ip vrf forwarding <vrfName>
no ip vrf forwarding <vrfName>
Function:
Relate the interface to the specific VRF.
Parameters:
<vrf-name>: Configure the name of VPN instance, the length is less than 32 characters.
Default:
Bind the interface to the master VRF.
Command mode:
Interface configuration mode.
Usage Guide:
If the interface needs to access internet, this command can be configured and an interface bind a
VRF only, but a VRF can bind multiple interfaces.
Example:
Switch(config)#int vlan 9
Switch(Config-if-Vlan9)#ip vrf forwarding vpn1
19.1.8 rd
Command:
rd <ASN:nn_or_IP-address:nn>
Function:
Configure RD(Route Distinguish) of VRF.
Parameters:
ASN:nn_or_IP-address:nn is the IP address format of the route identification label.
Default:
Not configured.
Command mode:
VRF mode