PLANET XGS3-24042 - Manual (Page 910)

45-55
Command:
show ipv6 multicast policy
Function:
Display the configured IPv6 multicast policy.
Command Mode:
Admin Mode.
Usage Guide:
Use this command to display the configured IPv6 multicast policy.
Example:
switch#show ipv6 multicast policy
ipv6 multicast-policy 2003::2/64 ff1e::3/64 cos 5
45.6.13 show ipv6 multicast source-control
Command:
show ipv6 multicast source-control [detail]
show ipv6 multicast source-control interface <Interfacename> [detail]
Function:
Display IPv6 multicast source control configuration.
Parameters:
detail: whether to display detailed information.
<Interfacename>: Port name.
Command Mode:
Admin Mode.
Usage Guide:
Use this command to display the configured multicast source control rules, if including the detail
option, it will also display the details of the access-list in use.
Example:
Switch#show ipv6 multicast source-control detail
Ipv6 multicast source-control is enabled
Interface Ethernet 1/0/1 use multicast source control access-list 8000
ipv6 access-list 8000 permit 2003::2/64 ff1e::3/64
ipv6 access-list 8000 deny 2008::1/64 ff1e::1/64
ipv6 access-list 8000 permit any-source any-destination
45.6.14 show ipv6 multicast source-control access-list