16 show ipv6 pim neighbor, 16 show ipv6 pim neighbor -12 – PLANET XGS3-24042 User Manual

Page 867

Advertising
background image

45-12

Displayed Information

Explanations

(*, ff1e::15)

(*,G) Forwaridng item

(2000:10:1:12::11, ff1e::15)

(S,G) Forwarding item

RPF nbr

Backward path neighbor, upstream neighbor of

source direction in DM, 0.0.0.0 expresses the

switch is the first hop.

RPF idx

Interface located in RPF neighbor

Upstream State

Upstream direction, including

FORWARDING(forwarding upstream data),

PRUNED(Upstream stops forwarding data),

ACKPENDING(waiting for upstream response,

forwarding upstream data)

Origin State

The two states: ORIGINATOR(on transmit

state-refresh state), NON_ORIGINATOR(on

non_transmit state-refresh state)

Local

Join Local position joins interface, the interface

receives IGMP Join

Pruned

PIM prunes interface, the interface receives Prune

messages

Asserted

Asserted state

Outgoing

Multicast data finally exported from interface is

index number, index is 2 in this case. It can check

interface information in detail by commanding

show ip pim interface

45.2.16 show ipv6 pim neighbor

Command:

show ipv6 pim neighbor [detail|]

Function:

Display router neighbors.

Command Mode:

Admin and configuration Mode

Usage Guide:

Display multicast router neighbors maintained by the PIM.

Example:

Switch(config)#show ipv6 pim neighbor

Advertising
This manual is related to the following products: