26 ip dhcp snooping limit-rate, Ip dhcp snooping limit, Rate – PLANET XGS3-24042 User Manual

Page 466

Advertising
background image


30-105

1

8

0

6

VLAN

Slot

Module

Port

1 byte

1 byte

1 byte

1 byte

2 byte

1 byte

1 byte

2 byte

Suboption

type

Length

Circuit

ID type

Length

VLAN field fill in VLAN ID. For chassis switch, Slot means slot number, for box switch, Slot is 1;

default Module is 0; Port means port number which begins from 1.

The compatible subscriber-id format with HP manufacturer defined as below:

1

2

Port

1 byte

1 byte

2 byte

Suboption

type

Length

Port means port number which begins from 1.

Example:

Set subscriber-id format of DHCP snooping option82 as hexadecimal format.

Switch(config)#ip dhcp snooping information option subscriber-id format hex

30.26 ip dhcp snooping limit-rate

Command:

ip dhcp snooping limit-rate <pps>

no ip dhcp snooping limit-rate

Function:

Set the DHCP message rate limit

Parameters:

<pps>: The number of DHCP messages transmitted in every minute, ranging from 0 to 100. Its

default value is 100. 0 means that no DHCP message will be transmitted.

Command Mode:

Globe mode

Default Settings:

The default value is 100.

Usage Guide:

After enabling DHCP snooping, the switch will monitor all the DHCP messages and implement

software transmission. The software performance of the switch is relative to the type of the switch, its

Advertising
This manual is related to the following products: