57 show ip ospf interface, Show ip ospf interface – PLANET XGS3-24042 User Manual

Page 586

Advertising
background image


35-225

22.1.1.0 192.168.1.2 308 0x8000000c 0xc8f0 22.1.1.0/24

ASBR-Summary Link States (Area 0.0.0.2)

Link ID ADV Router Age Seq# CkSum

192.168.1.1 192.168.1.2 1702 0x8000002a 0x89c7

AS External Link States

Link ID ADV Router Age Seq# CkSum Route

2.2.2.0 192.168.1.1 1499 0x80000056 0x3a63 E2 2.2.2.0/24 [0x0]

2.2.3.0 192.168.1.1 1103 0x8000002b 0x0ec3 E2 2.2.3.0/24 [0x0]

35.57 show ip ospf interface

Command:

show ip ospf interface <interface>

Function:

Display the OSPF interface messages.

Parameter:

<interface> is the name of interface

Default:

Not displayed

Command Mode:

Admin and configuration mode

Example:

Switch#show ip ospf interface

Loopback is up, line protocol is up

OSPF not enabled on this interface

Vlan1 is up, line protocol is up

Internet Address 10.10.10.50/24, Area 0.0.0.0

Process ID 0, Router ID 10.10.11.50, Network Type BROADCAST, Cost: 10

Transmit Delay is 5 sec, State Waiting, Priority 1

No designated router on this network

No backup designated router on this network

Timer intervals configured, Hello 35, Dead 35, Wait 35, Retransmit 5

Advertising
This manual is related to the following products: