26 show ipv6 rip redistribute, 27 timers basic, Show ipv – PLANET XGS3-24042 User Manual

Page 546: Rip redistribute, Timers basic

Advertising
background image


34-185

Aggregated

Ifname

To configure the interface name of the aggregation route. If the route

aggregated globally, then display “---”.

Metric

Metric of aggregation route.

Count

The number of learned aggregation routes.

Suppress

The times of aggregated for aggregation route.

34.26 show ipv6 rip redistribute

Command:

show ipv6 rip redistribute

Function:

Show the configuration information of redistributed other out routing to RIPng.

Default:

Not shown by default.

Command Mode:

Admin Mode and Configuration Mode.

Example:

Switch#show ipv6 rip redistribute

34.27 timers basic

Command:

timers basic <update> <invalid> <garbage>

no timers basic

Function:

Adjust the RIP timer update, timeout, and garbage collecting time. The “no timers basic” command

restores each parameters to their default values.

Parameter:

<update> time interval of sending update packet, shown in seconds and ranging between

5-2147483647;

<invalid> time period after which the RIP route is advertised dead, shown in seconds and ranging

between 5-2147483647;

<garbage> is the hold time in which the a route remains in the routing table after advertised dead,

shown in seconds and ranging between 5-2147483647.

Default:

Advertising
This manual is related to the following products: