PLANET XGS3-24042 - Manual (Page 729)

43-4
Parameter:
<process-id>: Process ID, ranging from 0 to 65535. It means that show main OSPF information of
all processes when there is no parameter configured.
Command Mode:
Admin mode
Example:
Show main OSPF information of all processes.
Switch#show ip ospf
Routing Process "ospf 0" with ID 192.168.40.69
Process bound to VRF default
Process uptime is 52 minutes
Conforms to RFC2328, and RFC1583Compatibility flag is disabled
Supports only single TOS(TOS0) routes
Supports opaque LSA
Supports Graceful Restart
Supports helper mode for Graceful Restart
Grace period for Graceful Restart 100 secs
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Refresh timer 10 secs
Number of external LSA 0. Checksum Sum 0x000000
Number of opaque AS LSA 0. Checksum Sum 0x000000
Number of non-default external LSA 0
External LSA database is unlimited.
Number of LSA originated 0
Number of LSA received 0
Number of areas attached to this router: 0
Display Description
Supports Graceful Restart Switch supports OSPF GR
Supports helper mode for Graceful Restart Switch supports helper mode of OSPF GR
Grace period for Graceful Restart 100 secs Switch configures OSPF GR Grace Period to 100s
43.7 show ip ospf graceful-restart
Command:
show ip ospf [<process-id>] graceful-restart
Function: