PLANET XGS3-24042 - Manual (Page 1031)

56-2
Command Mode:
Admin Mode
Example:
Delete all MAB binding.
Switch#clear mac-authentication-bypass binding all
56.3 debug mac-authentication-bypass
Command:
debug mac-authentication-bypass {packet | event | binding}
Function:
Enable the debugging of the packet information, event information or binding information for MAB
authentication.
Parameters:
packet: Enable the debugging of the packet information for MAB authentication.
event: Enable the debugging of the event information for MAB authentication.
binding: Enable the debugging of the binding information for MAB authentication.
Command Mode:
Admin Mode
Example:
Enable the debugging of the packet information for MAB authentication.
Switch#debug mac-authentication-bypass packet
56.4 mac-authentication-bypass binding-limit
Command:
mac-authentication-bypass binding-limit <1-100>
no mac-authentication-bypass binding-limit
Function:
Set the max binding number of MAB. The no command will restore the default binding number as 3.
Parameters:
<1-100> the max binding number of MAB, ranging from 1 to 100.
Command Mode:
Port Mode
Default: