PLANET XGS3-24042 - Manual (Page 317)

18-163
s-vid <new-vid> specifies VID of an external VLAN Tag
Default:
Do not assign the value.
Command Mode:
Policy class-map configuration mode
Usage Guide:
Only assign the new value again for the classified flow that correspond the match standard.
Example:
Set an external VLAN Tag' VID as 3 for the packet which satisfy c2 class rule.
Switch(config)#policy-map p1
Switch(Config-PolicyMap-p1)#class c2
Switch(Config-PolicyMap-p1-Class-c2)#set s-vid 3
Switch(Config-PolicyMap-p1-Class-c2)#exit