PLANET XGS3-24042 - Manual (Page 1164)

72-20
Command Mode:
Admin Mode and Configuration Mode.
Usage Guide:
This command used to list the information of currently available telnet clients which are connected
to the switch.
Example:
Switch#show telnet login
Authenticate login by local.
Login user:
aa
72.23 show temperature
Command:
show temperature
Function:
Show the temperature of the CPU.
Command Mode:
Any modes
Usage Guide:
This command can be used to monitor the CPU temperature of the switch.
Example:
Show the temperature of the CPU of the switch.
Switch(Config)#show temperature
Temperature: 47.0625 ℃
72.24 show tech-support
Command:
show tech-support
Function:
Display various information about the switch and the running tasks. This command is used to
diagnose the switch by the technical support specialist.
Command Mode: