PLANET XGS3-24042 - Manual (Page 1048)

58-1
Chapter 58 Commands for SAVI
58.1 Commands for SAVI
58.1.1 ipv6 cps prefix
Command:
ipv6 cps prefix <ipv6-address> vlan <vid>
no ipv6 cps prefix<ipv6-address>
Function:
Configure IPv6 address prefix of the link manually, no command deletes IPv6 address prefix.
Parameter:
ipv6-address: the address prefix of link, like 2001::/64;
vid: vlan ID of the current link.
Command Mode:
Global Mode.
Usage Guide:
Users should configure local address prefix: fe80::/64 of the link before enable the function of
matching address prefix of the link, it accepts the packets of which source addresses are the local
addresses of the link.
Example:
Configure the address prefix of the link to 2001::/64.
Switch(config)#ipv6 cps prefix 2001::/64
58.1.2 ipv6 cps prefix check enable
Command:
ipv6 cps prefix check enable
no ipv6 cps prefix check enable
Function:
Enable SAVI address prefix check function, no command will disable this function.
Command Mode:
Global Mode.
Default:
Disable SAVI address prefix check function.