PLANET XGS3-24042 - Manual (Page 899)

45-44
Admin and Configuration Mode.
Usage Guide:
Display the state information of ANYCAST RP, and display the mrt node information generated in
the first hop RP which is currently maintained by the protocol.
Example:
Switch(config)#show ipv6 pim anycast-rp first-hop
IP Multicast Routing Table
(*,G) Entries: 0
(S,G) Entries: 1
(E,G) Entries: 0
INCLUDE (2000:1:111::2, ffle::1)
Local .l..............................
Display Explanation
Entries The number of all kinds of entries.
INCLUDE The mrt information created in the first hop RP.
45.4.8 show ipv6 pim anycast-rp non-first-hop
Command:
show ipv6 pim anycast-rp non-first-hop
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Display the state information of ANYCAST RP, and display the mrt node information generated in
the non first hop RP which is currently maintained by the protocol, that is the mrt node information
which is created after the first hop RP transfers the register message it received to this RP.
Example:
Switch(config)#show ip pim anycast-rp non-first-hop
IP Multicast Routing Table
(*,G) Entries: 0
(S,G) Entries: 1