PLANET XGS3-24042 - Manual (Page 68)

XGS3 Command Guide
1-68
Usage Guide:
There are two available choices for the preferences of the registered commands in the switch. They are 1 and 15.
Preference of 1 is for the commands of the normal user configuration mode. Preference of 15 is for the commands
registered in modes other than the normal user configuration modes. 16 local users at most can be configured
through this command, and the maximum length of the password should be no less than 32.
Notice:
The user can log in user and priority after the command configures, before issuing the command authentication line
console login local, it should be made sure that at one user has be configured as preference level of 15, in order to
login the switch and make configuration changes in privileged mode and global mode. If there are no configured local
users with preference level of 15, while only Local authentication is configured for the Console login method, the
switch can be login without any authentication. When using the HTTP method to login the switch, only users with
preference level of 15 can login the switch, users with preference level other than 15 will be denied.
Example:
Configure an administrator account named admin, with the preference level as 15. And configure two normal
accounts with its preference level as 1. Then enable local authentication method.
Above all the configurations, only the admin user is able to login the switch in privileged mode through Telnet or
Console login method, user1 and user2 can only login the switch in normal user mode through the telnet and console
login method. For HTTP login method, only the admin user can pass the authentication configuration, user1 and
user2 will be denied.
Switch(config)#username admin privilege 15 password 0 admin
Switch(config)# username user1 privilege 1 password 7 user1
Switch(config)# username user2 password 0 user2
Switch(config)# authentication line console login local
1.1.37 web language
Command:
web language {chinese | english}
Function:
Set the language for displaying the HTTP Server information.
Parameter:
chinese for Chinese display;
english for English display.
Command mode:
Admin Mode
Default:
The default setting is English display.
Usage Guide: