PLANET XGS3-24042 - Manual (Page 761)

44-36
<A.B.C.D> is the RP address
<A.B.C.D/M> the scope of the specified RP address
<all> is all the range
Default:
This switch is not a RP static router.
Command Mode:
Global Mode
Usage Guide:
This command is to configure static RP globally or in a multicast address range and configure
PIM-SM static RP information. Attention, when computing rp, BSR RP is selected first. If it doesn’t
succeed, static RP is selected.
Example:
Configure vlan1 as candidate RP announcing sending interface globally.
Switch (config)# ip pim rp-address 10.1.1.1 238.0.0.0/8
Switch (config)#
44.3.29 ip pim rp-candidate
Command:
ip pim rp-candidate {vlan <vlan-id> | <ifname>} [<A.B.C.D/M>] [<priority>]
no ip pim rp-candiate
Function:
This command is the candidate RP global configure command, it is used to configure PIM-SM
candidate RP information in order to compete RP router with other candidate RPs. The “no ip pim
rp-candiate” command cancels the candidate RP.
Parameter:
vlan-id isVlan ID;
ifname is the name of the specified interface;
A.B.C.D/M is the ip prefix and mask;
<priority> is the RP selection priority, it ranges from 0 to 255, the default value is 192, the lower
value has more priority.
Default:
This switch is not a RP static router.
Command Mode:
Global Mode
Usage Guide:
This command is the candidate RP global configure command, it is used to configure PIM-SM