PLANET XGS3-24042 - Manual (Page 952)

47-18
Examples:
Create an MAC ACL named mac_acl.
Switch(config)# mac-access-list extended mac_acl
Switch(Config-Mac-Ext-Nacl-mac_acl)#
47.17 mac-ip access extended
Command:
mac-ip-access-list extended <name>
no mac-ip-access-list extended <name>
Functions:
Define a name-manner MAC-IP ACL or enter access-list configuration mode, “no
mac-ip-access-list extended <name>” command deletes this ACL.
Parameters:
<name>: name of access-list excluding blank or quotation mark, and it must start with letter, and the
length cannot exceed 32 (remark: sensitivity on capital or small letter).
Command Mode:
Global Mode.
Default:
No named MAC-IP access-list.
Usage Guide:
After assigning this command for the first time, only an empty name access-list is created and no list
item included.
Examples:
Create an MAC-IP ACL named macip_acl.
Switch(config)# mac-ip-access-list extended macip_acl
Switch(Config-MacIp-Ext-Nacl-macip_acl)#
47.18 permit | deny (ip extended)
Command:
[no] {deny | permit} icmp {{<sIpAddr> <sMask>} | any-source | {host-source <sIpAddr>}}
{{<dIpAddr> <dMask>} | any-destination | {host-destination <dIpAddr>}} [<icmp-type>
[<icmp-code>]] [precedence <prec>] [tos <tos>][time-range<time-range-name>]
[no] {deny | permit} igmp {{<sIpAddr> <sMask>} | any-source | {host-source <sIpAddr>}}