PLANET XGS3-24042 - Manual (Page 339)

19-185
default.
Usage Guide:
This command allows controlling the router announcement parameters of every IPv6 prefix. Note
that valid lifetime and preferred lifetime must be configured simultaneously.
Example:
Configure IPv6 announcement prefix as 2001:410:0:1::/64 on Vlan1, the valid lifetime of this prefix
is 8640 seconds, and its preferred lifetime is 4320 seconds.
Switch(Config-if-Vlan1)#ipv6 nd prefix 2001:410:0:1::/64 8640 4320
19.2.22 ipv6 nd ra-hoplimit
Command:
ipv6 nd ra-hoplimit <value>
Function:
Set the hoplimit of sending router advertisement.
Parameters:
<value> is the hoplimit of sending router advertisement, ranging from 0 to 255.
Command Mode：
Interface Configuration Mode.
Default:
The default hoplimit of sending router advertisement is 64.
Example:
Set the hoplimit of sending router advertisement in interface vlan 1 as 128.
Switch#(Config-if-Vlan1)#ipv6 nd ra-hoplimit 128
19.2.23 ipv6 nd ra-mtu
Command:
ipv6 nd ra-mtu <value>
Function:
Set the mtu of sending router advertisement.
Parameters:
<value> is the mtu of sending router advertisement, ranging from 0 to 1500.
Command Mode：
Interface Configuration Mode.
Default: