PLANET XGS3-24042 - Manual (Page 687)

37-326
<ADDRESS-FAMILY>: Address-family such as “ipv4 unicast”.
Command Mode:
Admin and configuration mode
Usage Guide:
Display the BGP path message includes the utilization state.
Example:
Switch#sh ip bgp paths
Address Refcnt Path
[0x331dad0:0] (1)
[0x331d850:93] (1) 600
[0x331d8d8:249] (2) 200 300
37.98 show ip bgp prefix-list
Command:
show ip bgp [<ADDRESS-FAMILY>] prefix-list [<NAME>]
Function:
For displaying the route meet the specific prefix-list in BGP.
Parameter:
<ADDRESS-FAMILY>: Address family such as “ipv4 unicast”
<NAME>: Name of prefix-list
Command Mode:
Admin and configuration mode
Usage Guide:
We can select the required BGP route by regular expression.
Example:
Switch(config)#ip prefix-list PL permit any
Switch(config)#
Switch#sh ip bgp prefix-list PL
BGP table version is 1, local router ID is 10.1.1.64
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 100.1.1.0/24 10.1.1.66 0 200 300 ?