PLANET XGS3-24042 - Manual (Page 1189)

76-7
Usage Guide:
Enable (Disable) the hex debug information of received and sent LDP message contents.
Example:
Enable the debug switch
Switch#debug ldp hexdump
Switch#
76.12 debug ldp nsm
Command:
debug ldp nsm
no debug ldp nsm
Function:
Enable the debug information switch of the message communication between NSM and LDP; the
no operation will disable the switch.
Default:
No display of the debug information.
Command Mode:
Admin Mode.
Usage Guide:
Enable (Disable) the debug information of NSM, mainly including interface changes, route changes,
entry distribution and etc.
Example:
Enable the debug switch
Switch#debug ldp nsm
76.13 debug ldp packet
Command:
debug ldp packet [receive|send|detail]
no debug ldp packet [receive|send|detail]
Function:
Display the debug information of LDP messages; the no operation will disable the switch.
Default:
No display of debug information.