PLANET XGS3-24042 - Manual (Page 1062)

59-1
Chapter 59 Commands for Web Portal
Configuration
59.1 clear webportal binding
Command:
clear webportal binding {mac WORD | interface <ethernet IFNAME | IFNAME> |}
Function:
Clear the binding information of web portal authentication.
Parameter:
mac: Clear the binding of the specific MAC address.
IFNAME: Port ID list, divide the ports with “;”.
If the parameter is null, delete all web portal binding.
Command Mode:
Admin Mode.
Usage Guide:
Clear the specified (the specific port or all ports) dynamic binding information of web portal.
Example:
Clear the binding information of web portal authentication.
switch#clear webportal binding ?
interface Interface setting
mac Configure mac address
<cr>
switch#clear webportal binding mac 00-00-00-00-00-01
switch#clear webportal binding interface ethernet 1/0/1
59.2 debug webportal binding
Command:
debug webportal binding
no debug webportal binding
Function:
Enable/ disable the binding debugging of web portal authentication.
Command Mode: