PLANET XGS3-24042 - Manual (Page 574)

35-213
Switch#config terminal
Switch(config)#key chain mychain
Switch(config-keychain)#key 1
Switch(config-keychain-key)#
Relevant Commands:
key chain, key-string, accept-lifetime, send-lifetime
35.41 key chain
Command:
key chain <name-of-chain>
no key chain < name-of-chain >
Function:
This command is for entering a keychain manage mode and configure a keychain. The “no key
chain < name-of-chain >” command deletes one keychain.
Parameter:
<name-of-chain> is the name string of the keychain the length of which is not specifically limited.
Command Mode:
Global Mode and Keychain Mode.
Example:
Switch#config terminal
Switch(config)#key chain mychain
Switch(config-keychain)#
35.42 log-adjacency-changes detail
Command:
log-adjacency-changes detail
no log-adjacency-changes detail
Function:
Configure to keep a log for OSPF adjacency changes or not.
Default:
Don’t l keep a log for OSPF adjacency changes by default.
Command Mode:
OSPF Protocol Configuration Mode