PLANET XGS3-24042 - Manual (Page 526)

33-165
Show the routes in the RIP route database.
Command Mode:
Admin mode
Example:
Switch# show ip rip database
Codes: R - RIP, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS,
B –BGP
Network Next Hop Metric From If Time
R 10.1.1.0/24 1 Vlan1
R 20.1.1.0/24 1 Vlan2
Command:
show ip rip
33.39 show ip rip interface
Command:
show ip rip interface [<ifname>]
Function:
Show the RIP related messages.
Parameter:
<ifname> is the name of the interface to show the messages.
Command Mode:
Admin mode
Example:
Switch# show ip rip interface vlan 1
Vlan1 is up, line protocol is up
Routing Protocol: RIP
Receive RIP packets
Send RIP packets
Passive interface: Disabled
Split horizon: Enabled with Poisoned Reversed
IP interface address:10.1.1.1/24